How to Change the Shutter Speed on a Nikon
How to Change the Shutter Speed on a Nikon

How to Change the shutter speed on a Nikon- 7 Different Cameras Settings

The shutter speed is the amount of time that the camera shutter is open. The time that your camera’s shutter is open is also known as exposure time.

Shutter speed is measured in seconds – or in most cases fractions of seconds. For example, you might see a setting such as 1/1000 or 1/2000.

Read Also:10 Best Gimbal For Nikon D850 – Reviews & Guide

The higher the denominator, the shorter the amount of time that your camera’s sensor will be exposed to light. This means that you will get a sharp image with no motion blur. For example, if you are photographing moving subjects then a fast shutter speed (1/1000) will “freeze” their movement and prevent any blurring due to movement.

If you want to capture motion blur then use a slow shutter speed (1″). This means that your camera’s shutter will be open for one second and any movement during that second will be recorded. Motion blur can add drama to an image, but it can also make it more difficult for viewers to know what they are looking at!

Nikon D5600

To change the shutter speed on a Nikon D5600:

  • Turn on the camera, then press the shutter-release button halfway down.
  • Press the “i” button, then press the multi-selector up or down to highlight the shutter speed.
  • Press the multi selector left or right to change the shutter speed.

Nikon D5300

To set the shutter speed on your Nikon D5300, follow these steps:

  • 1. Make sure the camera is turned off. Press the power button to turn it on.
  • 2. Press and hold the Menu button until you see an icon that looks like a pencil and pad of paper with a wrench next to it on the bottom right corner of your screen.
  • 3. Scroll down until you see an icon that looks like a person running, then press OK to select it. It should be in between icons that look like a person sitting and an eye with a plus sign next to it—these are for auto mode and portrait mode respectively, so don’t get confused!
  • Hold down the shutter release button halfway as you compose your shot, which will activate an exposure meter visible in your viewfinder that shows how much light enters your lens as you adjust settings such as aperture or shutter speed (the default exposure mode for Shutter Priority is S). In other words, this exposure meter will show how properly exposed or under/overexposed your image will be based on these settings. If there are no overlapping brackets below this scale, then congratulations! Your image will be perfectly exposed according to these settings!

Nikon D3400

  • You can change the shutter speed on your Nikon D3400 camera by selecting “Auto” or “Manual” in the mode dial.
  • To use manual and adjust the shutter speed, turn the rotating dial until you reach the desired setting.
  • In auto, your Nikon D3400 will automatically set a default shutter speed based on how much light is present.

Nikon D7000

The Nikon D7000, like all cameras, has three basic controls over exposure—aperture, shutter speed and ISO sensitivity:

  • Aperture determines the amount of light that will pass through the lens.
  • Shutter speed determines how long the shutter stays open to allow light to pass through.
  • ISO sensitivity determines how sensitive your camera’s sensor is to light.

To change the shutter speed on your Nikon D7000, follow these steps:

  • Press the Menu button (the one with a picture of a wrench on it).
  • Select Shooting Menu from the menu that appears. (That’s the one with a picture of a camera.)
  • Select Shutter Speed from this menu and press OK (it’s got a picture of a camera and an hourglass on it). You can use your left/right buttons or spin your dial to change between Auto and Manual modes at this point if you wish; otherwise, just leave it alone. You will see several options appear in front of you; use your up/down buttons or spin your dial to manipulate them until they show what you want them to show (note that again you can use “M” for manual control, “B” for bulb control or other values up to 30 seconds depending on whether regular daylight or low-light situations are involved). Press OK once more when you are done changing things around here. The menu will disappear and you will be back in view mode looking at whatever is in front of you through your viewfinder as before except now with slightly different settings! 6. Congratulations! Your new settings are active now! Get out there and start shooting some stunning shots with them!

Nikon D7500

Changing the shutter speed for the Nikon D7500 is simple, and can be done in a few easy steps:

  • Press the Menu button to display the menu screen.
  • Select Shooting Menu from the list on the left side of the screen. The Shooting Menu will appear on the right side of your screen.
  • Use your up/down arrow keys to select Shutter Speed and then press right to begin adjusting this setting. The shutter speeds available for these cameras are located along a row at the top of your screen as you adjust this setting. Depending on what mode you are in, some of these options may be greyed out and unavailable for use (for instance, many of these cameras cannot access shutter speeds slower than 30″ while in Auto mode).
  • Use your up/down arrow keys to select your desired shutter speed and then press right again to confirm this setting, which will return you to the main menu screen with a green dot next to Shutter Speed indicating that it has been set accordingly.
  • Press OK or press down until you see Exit along the bottom row and press right to confirm this selection, which will bring you back home without saving any changes made since entering into this menu system (if any). You’re done! Your camera is now ready for use with its newly selected shutter speed!

Nikon D3200

  • Press the “Menu” button on the back of the camera, use your left-right button to select “Custom Settings” on the menu, and choose “e2 ISO Auto”.
  • Highlight “OFF” to turn it off and then press your OK button.
  • Press your shutter release button halfway down, and look at your camera’s rear LCD screen, a bar will pop up at the bottom of the screen saying what mode you are in (Aperture Priority Mode) and what your aperture is set at (in this case f/8). Press the +/- button until you see an underlined blinking 1/1000 second on that display area. In some cases, it will not be underlined so just make sure its blinking. This means that you have selected Shutter Priority mode on a Nikon D3200 camera!

Nikon D3100

  • hit the Menu button
  • Go to the Custom Setting menu (pencil icon)
  • Select the Timers/AE Lock submenu (clock-looking icon)
  • Choose Auto-Off Timers from the list of options using the multi-selector
  • Now, scroll through the options until you reach “5 min” (this is usually selected by default). Select this option. This should change your settings so that when you select a shutter speed, it will count down for 5 minutes and then turn off your camera. You should also be able to set this for 10 min or 15 min if you’d like to select a longer time frame.

Conclusion of how to change the shutter speed on a Nikon

To recap, we’ve shared how to change the shutter speed on a Nikon- 7 Different Models Settings. That includes:

  • How to change the shutter speed on a Nikon model Nikon D5600
  • How to change the shutter speed on a Nikon model Nikon D5300
  • How to change the shutter speed on a Nikon model Nikon D3400
  • How to change the shutter speed on a Nikon model Nikon D7000
  • How to change the shutter speed on a Nikon model Nikon D7500
  • How to change the shutter speed on a Nikon model Nikon D3200
  • How to change the shutter speed on a Nikon model Nikon Nikon D3100

If you have any of these models, you should have no problems adjusting your camera’s settings no matter where you are in your photography journey.